[amsat-bb] Issues with ISS digipeater this morning?

Patrick STODDARD (WD9EWK/VA7EWK) amsat-bb at wd9ewk.net
Sun May 21 15:07:34 UTC 2017


That's an interesting observation. Were you referring to how the
signals sounded last year before that VHF radio failed, or are you
going further back when packet was done with a TM-D700?

I have worked ISS passes the past two evenings from locations near
Dayton. Using my TH-D74 HT and Elk log periodic, the signals I
hear now are the same as I was hearing before the mid-October
failure of the previous VHF radio. I didn't do much packet
through the ISS when that Kenwood radio was being used, so I can't
really speak to how it was a few years back. I hope to be on
again tonight from .... (location yet to be determined, but not in
the Dayton area), even though the passes will be late in the evening,
before flying home tomorrow night.


Twitter: @WD9EWK or http://twitter.com/WD9EWK

On Sun, May 21, 2017 at 4:18 AM, Mvivona <Mvivona at yahoo.com> wrote:

> Hi Patrick!
> My observations are from a non standard source for comparison purposes. I
> have sort of a unique situation.
> ​<snip>
> With the old radio setup on the ISS I could easily copy it the moment it
> crested the horizon. It was full scale by 10 deg high. Since they installed
> the new radio setup I can barely hear it on a direct overhead pass.
> I have no problem picking it up at home, however my home satellite station
> has dual high gain yagis, filtered preamps at the antenna all being driven
> with a rotor, short coax and feeding an iCom 910.

More information about the AMSAT-BB mailing list