[amsat-bb] NO-84

Robert Bruninga bruninga at usna.edu
Sat Jan 28 15:29:18 UTC 2017

Would it be a good idea to mention what you use for uplink doppler
I assume Andys K0SM's DopplerPSK?


On Fri, Jan 27, 2017 at 5:56 PM, KO6TZ Bob <my.callsign at verizon.net> wrote:

> Joe,
> I was not on that pass.
>  Most of the time, you will see the telemetry very strong down at 310Hz.
> You should see your own signal where ever you put it. (I use 1600Hz)  You
> should also see the non Doppler corrected beacons. These skew across the
> waterfall.  Won't waste time trying to copy them.
> Now for FlDigi...   The maximum acquisition range is 500 Hz.  If the
> signal is not within the "Red" bar limit above the waterfall, the program
> will not look for it. Also look in the configuration for multi option being
> selected.
> As a frequent user of NO-84_PSK31, I recommend DigiPAN or WinPSKse. They
> each have their advantages.  DigiPAN copies many signals with limited AFC.
> WinPSKse copies only two signals with 3,000Hz of AFC.   Your choice.
> Bob
> I had a decent pass just now,
> Saw mine as well as a few other signals and the telemetry.
> Key word is I "SAW" in the waterfall these signals.
> BUT.. not one of them would decode.
> Anyone have a guess what might be happening?
> Joe WB9SBD
> --
> Sig
> The Original Rolling Ball Clock
> Idle Tyme
> Idle-Tyme.com
> http://www.idle-tyme.com
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list