[amsat-bb] (no subject)

Dale Kubichek n6jsx at yahoo.com
Sun Feb 19 20:09:07 UTC 2017

FT-767GX, IC-271/471, IC-7000, only my IC-9100 can do this (Set Mode items 45/46/47 'pre-amp', unknown voltage/max-current as manual does not state).  

Hence why most older radios need to have a shack external coax-VDC injector/RF-filter device to make work.  
 Best regards,   
Dale Kubichek, MS-EET, N6JSX

      From: Greg D <ko6th.greg at gmail.com>
 To: Dale Kubichek <N6JSX at Yahoo.com>; "amsat-bb at amsat.org" <amsat-bb at amsat.org> 
 Sent: Sunday, February 19, 2017 2:39 PM
 Subject: Re: [amsat-bb] (no subject)
What rig are you using in the shack?  Many of them have the option to
power a pre-amp via the coax, though sometimes this requires opening the
box up to move a jumper.

Greg  KO6TH

Dale Kubichek via AMSAT-BB wrote:
> These are very good devices (lil pricey), but an issue I found is they do not sell the shack-coax-end 'voltage input/isolation' box/device to power these via coax. 
> Just like I'd like to find a solid low-loss on-mast two-position-coax-switch to be controlled via ~12VDC from the shack coax. Making changing CP or Vet/Horz easy with only one coax feed. I want them for 2m/70cm/1.2G. MFJ has one but it's not rated for >150MHz. 
>  Best regards,  
> Dale Kubichek, MS-EET, N6JSX
> Sidney, OH 45365  EN70vh
> http://groups.yahoo.com/group/HAM-SATs
> http://groups.yahoo.com/group/RDF-USA
> Message: 2
> Date: Sat, 18 Feb 2017 20:34:38 -0500
> From: Paul Stoetzer <n8hm at arrl.net>
> To: "kb2cwn at yahoo.com" <kb2cwn at yahoo.com>
> Cc: "amsat-bb at amsat.org" <amsat-bb at amsat.org>
> Advanced Receiver Research has the most cost effective mast-mounted RF
> switched preamps.
> http://advancedreceiver.com/page10.html
> SSB Electronics' line of preamps might be better, but are more expensive.
> http://www.ssbusa.com/NEWSSBPREAMPS.html
> 73,
> Paul, N8HM
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


More information about the AMSAT-BB mailing list