[amsat-bb] Satpc32 control IC910

Jim White jim at coloradosatellite.com
Sat Apr 29 12:32:00 UTC 2017

Thanks to all who replied. We have it figured out.


On 4/29/2017 6:29 AM, KO6TZ Bob wrote:
> Jim,
> In satellite mode, the IC910H puts the sub-band downlink on the top of 
> the display and the main-band on the bottom.  This is reversed from 
> the normal display.  Is this what you are referring to?
> bob
> ko6tz
> I'm trying to set up an IC910 with SatPC32 to work with a VHF up / UHF
> down satellite.
> I've built a doppler.sqf entry with 435xxx as the downlink and 145xxx as
> the uplink.  The 910 will only transmit on the main band so that needs
> to be the VHF uplink. But SatPC32 puts the RX freq there, and the TX
> freq in the sub band.
> Also, what should be checked in the options in the radio setup window.
> I have none checked at this time.
> Is there a setting to change the main/sub tx/rx or can I just swap the
> up and down freqs in the doppler.sqf entry?
> Jim
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. 
> Opinions expressed
> are solely those of the author, and do not reflect the official views 
> of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite 
> program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list