skristof at etczone.com
skristof at etczone.com
Wed Jul 13 16:53:29 UTC 2016
Your descriptions sound very familiar. So, maybe it's the HDSDR and not
the FoxTelem at all.
I am running Windows 10 on the machine. When I get home from work, I'm
going to reset HDSDR to default, then set it up again for FoxTelem and
see what happens.
If that doesn't work, I may try another SDR software.
On 2016-07-13 12:45, Clayton W5PFG wrote:
> I've had some similar issues as well. I usually blame operator error on my part. When this has occurred, I reset HDSDR back to its original configuration.
> "Options -> Misc Options -> Reset to factory settings" are the menu picks. I then will use my personal "cheat sheet" to setup HDSDR back to my preferences. This has fixed the type of issue you describe Jerry several times.
> On 7/13/2016 11:33, Jerry Buxton wrote:
>> I have a similar problem, I used HDSDR for a couple of years in the
>> development/testing of the Foxes and then "one day" a few months ago,
>> FoxTelem just quit decoding what came from HDSDR. I never found a
>> reason, after tweaking everything I know of to tweak. Same symptoms as
>> yours, looks right but doesn't decode.
>> I had also used SDR# in some of the testing so I switched back to it and
>> it has been working fine. I still try HDSDR now and then and it still
>> doesn't work.
>> This was all on the same PC running Windows 10, so HDSDR worked and then
>> just didn't. I don't know if it was a Windows update or what.
>> Anyway you might want to try another SDR application, to see if you can
>> get back on track.
>> Come to think of it I just built a new PC so maybe I'll try HDSDR on it
>> now, and see if it works or not. We're testing RadFxSat so maybe I can
>> let it run while I'm in the Fox Labs doing the testing and see if it
>> captures any of the test data. I will (try to remember to!) let you
>> know if it does work on the new PC. FWIW, I'm not recommending a new PC
>> just to make it work! :-D
>> Jerry Buxton, NØJY
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB