[amsat-bb] Problems With SATPC32

David Maciel (XE3DX) david.xe3dx at gmail.com
Fri Dec 9 03:59:48 UTC 2016

I am trying the SATPC32 version 12.8c, but I have some problems that I
would like to comment on and hope for help.

1.- I have an interface provided for a few days for the FT-847, when
starting SATPC32 is put into CAT mode and puts the frequencies of the
selected satellite on the radio. When the satellite Doppler does not start
in the VFO's of the radio.

2.- I create a group of satellites or a list, to re-start SATPC32 that list
is no longer a priority, I have to re-open it in the foreground or view.

3.- I configured the Rotor G5500 with YAESU GS_232 interface, and the rotor
does not work, I revise Setup_Rotor and I see that interface change only,
it returns by default to the DDE interface.

All these problems may be related to using the test version ...? I need to
buy the license to solve this? Who guarantees that everything works well ..?

thanks for your help.

David Maciel XE3DX

*http://www.qsl.net/xe3dx/ <http://www.qsl.net/xe3dx/>*

*david.xe3dx at gmail.com <david.xe3dx at gmail.com>*

More information about the AMSAT-BB mailing list