[amsat-bb] SatPC32 actinh wierd

Jeff jeff_griffin at comcast.net
Sun Jun 21 20:38:18 UTC 2015

I feel your pain Scotty, I  have a similar problem with my 9100, LVB, and 
SatPC32. In my case the LVB would show a memory error and I would lose 
calibration. Only way to fix would be a full re-calibration. This is a real 
pain to go through during a pass so I just remember to turn on the LVB, then 
the 9100, then bring up SatPC32. I know of no other way around this....

73 Jeff kb2m

-----Original Message----- 
From: Scott Smith
Sent: Sunday, June 21, 2015 4:00 PM
To: Amsat
Subject: [amsat-bb] SatPC32 actinh wierd

Hi, I fired up  my SatPC32 in the wrong order from the way I usually do it, 
I usually turn on radio and my LVB tracker first then fire up the computer. 
The LVB  works fine,but I got a message “could not open Com3 and to check if 
It was available” this is weird as this laptop is dedicated only for 
satellite use, and I have not changed anything. I use a Kenwwod IF232r 
between my computer and my TS790a radio. I opened the device manager and it 
says for the FT232r USB UART “the drivers for this device are not installed 
(Code 28). I tried to downoard the driver from ZLP and it still does not 
work?, any ideas? Tnx in advance. 73 de VE6ITV Scott
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions 
are solely those of the author, and do not reflect the official views of 
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb 

More information about the AMSAT-BB mailing list