[amsat-bb] Interfacing ICOM 9100 with PC

Mvivona Mvivona at yahoo.com
Sun Jun 7 13:03:51 UTC 2015


I use Ham Radio Deluxe ver. 6.29.355. It was simply plug in the USB cable, select 9100 and I was connected. Make sure you use an adequate computer if you go the HRD route as all the modules you will ever need are built into the suite and require more resources than some of the other ponderous packages. 
I originally made the mistake of using the old version 5.X and had some odd problems with the 9100. Ever since I installed the latest version it is been trouble free, fingers crossed.


Michael Vivona
Sent from my iPad

On Jun 7, 2015, at 1:57 AM, kshitij sandeep <kshitij14395 at yahoo.co.in> wrote:


I have recently purchased an ICOM 9100 for the purposes of a educational satellite project.
I require the radio to uplink telecommands and downlink payload data and telemetry in FSK and OOK type modulation.
Any help regarding the interfacing of PC to the Radio for the same purpose would be deeply appreciated.

Thank you
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list