Clayton Coleman kayakfishtx at gmail.com
Sun Feb 15 19:16:55 UTC 2015

The fundamental issue with the "CQ SATELLITE" offender you mentioned is his
blatant failure to identify his station.
I'm not sure it's kosher on any band or mode to call CQ so repeatedly
without identification.

I believe one of our AMSAT friends was able to capture the offending
callsign so that he can be properly educated and brought into the fold...
He just needs a little friendly elmering.

W5PFG /Handheld /Portable /Ribeye
On Feb 15, 2015 1:07 PM, "Clint Bradford" <clintbradford at mac.com> wrote:

> This post does NOT apply to about 99.4% of the members here ... So if you
> are a seasoned FM bird operator, just skip reading. BUT if you are new to
> the FM satellites ...
> I have heard a couple hams trying to work SO-50 the past week. They have
> their sat prediction software all set up properly ... have improved their
> antennas ... and have the proper set of frequencies programmed ...
> But they are not working full duplex (where you can monitor the downlink
> as you key your mic) and are stepping on other transmissions. AND they are
> simply declaring, "CQ satellite ... " over and over and over.
> That is not how we should be working the FM birds.
> Ideally, we should be working the FM voice satellites in full duplex mode,
> where we can simultaneously listen to the downlink as we are transmitting.
> This might mean a second radio with an earpiece (to avoid feedback) to make
> sure you are "making it" and are not stepping on others' contacts.
> Carefully monitor the downlink, and wait for a break in the conversations
> to announce yourself. You might find it helpful to record your sessions for
> later review. Even if you don’t make a contact during a pass, a recording
> can help you recognize the callsigns and voices of other operators. Pocket
> recorders or smartphone apps are great for this.
> Knowing your grid square - and having a grid square map - is a quick way
> of identifying locations of what you will hear. There are also fellow
> satellite operators who are working towards awards based on the number of
> unique grid squares they contact: that is why you should know yours as you
> work the birds. The ARRL and Icom have grid square maps: Icom’s is free and
> available at better ham radio stores.
> When you clearly hear others, listen for a break in the action, and use
> the ITU-approved phonetics to announce your callsign, grid square, and
> operating mode. I am K6LCS in grid square DM-13, so it becomes ...
> There's a little "debate" on the necessity of the "operating mode"
> declaration. If you state, "handheld," it used to tell seasoned satellite
> operators to let you in and get your contact made - knowing you were
> working low power. Some might use "demo" as their op mode - as they operate
> in front of a club or hamfest. It is not "improper" to include an op mode -
> many do not.
> SO ... simply keying up and declaring "CQ satellite" over and over again
> is simply not the proper protocol to be using. It does not identify neither
> you nor your location.
> More information on working the "easy birds" always at ...
> http://www.work-sat.com
> Clint Bradford K6LCS
> 909-241-7666 - cell, Pacific coast time
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list