[amsat-bb] TNC Question
vu3tyg at yahoo.co.in
Fri Jun 20 05:14:26 UTC 2014
You can configure AGWPE for the KAM TNC and make sure to provide the commands in AGWPE to initialize in the KISS mode then use UISS to communicate with the ISS.
IniKiss1: XKCH OFF
IniKiss2: INTFACE KISS
ExitKiss On Exit Checked
I have read XKCH OFF and INTFACE KISS sometime's is not recognized by KAM, I use ^M with MFJ 1278B and it works.
> From: JoAnne Maenpaa <k9jkm at comcast.net>
>To: AMSAT-BB at amsat.org
>Sent: Friday, 20 June 2014 6:22 AM
>Subject: Re: [amsat-bb] TNC Question
>> ... searching for settings specific to this unit for ARISS work
>I'm not familiar with the Kantronics syntax for typing commands but
>see below for a general summary of the parameters you may find useful.
>ARISS has a summary of hardware TNC and soundcard TNC operations
>2.pdf (careful, might line wrap this URL)
>The list of parameters you will find useful but may need to adapt to
>MYCALL - Your Callsign Default is NOCALL, but you want others to know
>you are there.
>DAYTIME - YYMMDDHHMM Used if you want to timestamp the packets you are
>MONITOR ON - Displays all packets on the frequency
>MALL ON - Displays all packets on the frequency (connected or
>MCOM ON - Displays the AX.25 protocol with the message (might clutter
>MCON ON - Allow you to see all packets even when in CONVERS mode
>MSTAMP ON - Monitored packets are timestamped
>MRPT ON - Displays the entire digipeat path for the packets.
>CONSTAMP ON - Connect and disconnect status messages are timestamped
>HEADERLN ON - Header information is displayed on separate line from
>PASSALL ON - TNC will accept and display packets that have errors
>(noise). Partial packets, even with errors, are often still readable
>to the human eye.
>PASSALL OFF - TNC will only accept and display packets that have
>CONVERS <enter> - Mode to type packet message from keyboard directly
>to the TNC. Ctrl-C will exit CONVERS mode.
>MHEARD <enter> - Displays your TNC's "heard" list (updated only when
>UNPROTO CQ VIA ARISS - Most basic string for ARISS to copy, route, and
>digipeat your packet
>73 de JoAnne K9JKM
>k9jkm at amsat.org
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB