[amsat-bb] Re: 145 MHz signal blocking 435 MHz downlink
kq6ea at verizon.net
Mon Jan 20 16:54:13 PST 2014
The original article said it didn't matter, but I put a 50 Ohm load on
mine just on "General Principles".
I HATE seeing a port like that unterminated!
73, Jim KQ6EA
On 01/20/2014 10:06 PM, Vince Fiscus, KB7ADL wrote:
> At 07:09 PM 1/19/2014 +0000, Jim Jerzycke <kq6ea at verizon.net> wrote:
>> Buy a diplexer, and connect it as shown in the linked article:
>> I also tilt both of my Yagis so they're 45* to the boom, which makes
>> them 90* to each other.
>> Yes, I lose some signal on terrestrial use, but ti helped cut the
>> coupling, and desense, down quite a bit.
>> 73, Jim KQ6EA
> One thing I've always wondered about this is, would one what to
> put a 50 ohm non inductive resister on the 2M output of the
> diplexer? or shouldn't that make much difference.
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB