[amsat-bb] Re: Satellite telemetry decoding

Dave WØDHB dave at w0dhb.net
Sat May 18 08:42:02 PDT 2013


You might take a look at MixW , AWGPE or Packet Engine Pro for decoding
These are software modems so you won't need a TNC.

 If you are decoding 9600 Baud packets, make sure you get your audio output
from pin 4 of the 910H main or sub band data sockets, use pin 5 for 1200

Programs like Fldigi, DM780 or CWskimmer could be used to decode CW .


-----Original Message-----
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Mike Sprenger
Sent: Saturday, May 18, 2013 7:33 AM
To: amsat-bb at amsat.org
Subject: [amsat-bb] Satellite telemetry decoding


So I've got satpc32 running rotors and radios automatically. Radio is

I have Interest to record and decode CW satellite telemetry to text and then
use the DK3WN tools to decode. 

Any suggestion for two things:

1.  what to use to record the audio from the radio automatically ?
2.  what software to decode the CW to text from the CW beacons ?


Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list