[amsat-bb] Re: psk-1 tnc-nb96 question
Mike_Nettles at centurytel.net
Sun Jun 16 10:52:53 PDT 2013
>From the link you posted looks like I have to use the TNC-MB96 and PSK-1 together to use it for regular 9.6k packet but I'm sure the TNC-MB96 could work by itself. I'll look at the jumper settings..ect and see what I can findout. Sure wish there were some birds up that I could use this with.
Thanks for the reply,
----- Original Message -----
From: Stefan Wagener
To: Mike Nettles
Sent: Saturday, June 15, 2013 7:57 AM
Subject: Re: [amsat-bb] psk-1 tnc-nb96 question
Looking at this:
it looks like it should work.
On Fri, Jun 14, 2013 at 10:44 PM, Mike Nettles <Mike_Nettles at centurytel.net> wrote:
I picked this up a while back and it came with all the docs, jumper info..ect. Can these be used for 9.6k baud regular packet? I hooked up the tnc and it comes on with WA8DED Tnc Firmware V 2.6 . If it can be used for regular packet can that firmware be replaced?
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB