[amsat-bb] Re: ARISSat-1 tlm decoder.
aa2tx at comcast.net
Tue Apr 12 02:12:47 PDT 2011
Bring up the Windows "Volume Control" and on the mixer
panel for playback, enable "Line In" or "Microphone",
whichever you are using for the input. You can adjust
the volume with the slider.
At 06:21 PM 4/11/2011, G0MRF at aol.com wrote:
>I have a minor (probably operator error) with the TLM software.
>Is there a way to get the audio to feed through to the PC speakers? I've
>tried Spectran and Spectraview without problem, but the ARISSat software
>does not appear to send audio out on my system. I cant hear the radio as I
>have a jack in the headphone socket which mutes the radio's speaker.
>The software is working. I can decode the CW callsign and locator of a 2m
>beacon and the level is controlled nicely with the windows 'microphone'
>It's not muted
>It's got the correct input selected and the gain turned up.
>But.....no audio out...so I'm just setting the frequency by visually
>putting the signal in the right place.
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB