Fox

FoxTelem Version 1.07 Released

by

I’m officially releasing version 1.07 of FoxTelem. A test version has been out for a while, but it had several issues, including a lower decode rate than 1.06. That prevented release for a while. Those issues (and something like 65 other defects) are now all fixed and this decoder performs better than 1.06. Feel free to test them side by side and report back if that is not the case for you. We are always interested in any comparative results.

In addition to defects in FoxTelem 1.06 and earlier versions of 1.07, this also introduces Doppler calculation with automatic adjustment of the decoder frequency. This is especially useful for decoding beacons and has been helpful in testing for Fox-1A / AO-85 and Fox-1Cliff / AO-95 which are both in SAFE mode. Decoding from Doppler takes a bit of configuration to get right. Have a read of the new sections in the manual or ask for help if you want to give it a try. There are pros and cons vs “Find Signal” for sure.

Version 1.07 changes the core SDR within FoxTelem to use a Numerically Controlled Oscillator (NCO) rather than an FFT Filter for the conversion to base-band. This produces better decodes and will allow the support of wider bandwidth SDRs in the future. The old decoder is available still if needed from the settings screen. Read the manual for details.

Version 1.07 also introduces two new BPSK decoders in advance of the Fox-1E launch. (I have no inside information about when that will be, but I have the decoder ready 🙂 I also wrote some notes on the comparison between the two decoders, which you can read if you are interested in BPSK decoding performance, or just wonder what I do with my time in the evenings: http://www.g0kla.com/workbench/2019-03-09.php

The releases are here:
http://amsat.us/FoxTelem/windows/foxtelem_1.07y_windows.zip
http://amsat.us/FoxTelem/linux/foxtelem_1.07y_linux.tar.gz
http://amsat.us/FoxTelem/mac/foxtelem_1.07y_mac.tar.gz

KEY CHANGES in 1.07
~~~~~~~~~~~~~~~~~~
* Ability to add a new spacecraft from the menu. You can also remove them.
* Doppler calculation and tracking as an option instead of “Find Signal”
* A better SDR based on a Numerically Controlled Oscillator, ready for wider SDRs
* Two new PSK decoders – Costas Loop and Dotproduct
* RTL dongle implemented for testing, though more work to do
* Stops downloading keps when position calc is off
* Allows toggling of high speed / DUV display when in auto mode
* Fixed plotting issues for Earth plots
* Fixes several crashes and bugs
* Fixes copy paste issues with tables
* Respects left/right audio preference when processing wav files
* Implements formats for later spacecraft – Fox-1E and HuskySat
* Linux and Mac launch script updated to locate the JVM (especially on Mac). Please report if when this works/does not work
* MEMS gyro calibration updated
* Fixed a bug where AO-85 data from the server could not be stepped through

And many other bug fixes. Full list of changes here: https://github.com/ac2cz/FoxTelem/milestone/12?closed=1

Let me know any feedback.

73
Chris
G0KLA / AC2CZ

AO-85 Status Update

by

All,

As you probably know, AO-85 has had issues recently with the batteries dropping precariously low during eclipse. We think it’s likely the batteries suffered degradation due to heat during previous periods of no eclipses. This has made it difficult to keep the satellite available for use without endangering the batteries. Today the nominally 3.6v pack was down to 2.8v at the end of the eclipse. That is dangerously low.

In an effort to extend the usable life of the satellite, this evening we turned both the IHU and the transmitter off. This ceases all transmissions, including the beacons every two minutes in both sunlit and eclipsed parts of the orbit. We will periodically turn the satellite back on for an orbit or two, in order to gather telemetry. If all goes as planned, we will turn the repeater back on during the next period of no eclipses beginning around January 24th. In the meantime, it is important to leave AO-85 tracked in your FoxTelem setups, in order for us to gather telemetry and keep tabs on the situation. If you do happen to hear a Veronica beacon, or either the normal repeater or the COR/no telemetry repeater, please let the AMSAT-BB know, or send me an email or message directly.

We appreciate your understanding and cooperation as we try to make the most of the situation. Please consider supporting the AMSAT GOLF project with your membership, and one-time or recurring donations at
https://www.amsat.org/product-category/amsat-membership/ or https://www.amsat.org/donate/.

73, Drew KO4MA
AMSAT VP Operations

Fox-1Cliff/AO-95 Commissioning Status

by

Following the launch of Fox-1Cliff/AO-95, AMSAT Engineering began the commissioning process, with the help of AMSAT Operations, on Tuesday December 4. Satellite telemetry indicates that the bird is healthy, and I thank all of the stations who have captured and relayed the telemetry that enabled us to monitor and determine the health of the various systems on board. Fox-1Cliff required an extended period monitoring battery and power levels due to the anomaly and fix that was applied back in February of 2016 during environmental testing, and the result of that is positive.

However, during the next steps of commissioning we discovered an anomaly with her receive capability. After a few days of tests, analysis, and discussion, it appears that Fox-1Cliff/AO-95 will not be commissioned as our fourth Fox-1 amateur radio satellite.

AMSAT Engineering will continue to evaluate and test Fox-1Cliff/AO-95 for solutions to the anomaly and your continued help in providing telemetry is appreciated so that we can have data throughout her daily orbits rather than limited data over our U.S. stations. The data, analysis, and testing could lead to a positive solution but at the very least will be important to AMSAT’s satellite programs in providing information that would help us and others, as we do freely share our successes and failures, to avoid similar situations with future missions.

I would like to thank all of the AMSAT Fox Engineering volunteers who made Fox-1Cliff possible and continue to build our new satellites, becoming even better as we move forward.

I will provide more information on the anomaly and any determination we make regarding the possible cause or causes as well as information on the possibility of recovery, over time. Please be patient regarding that. Many of you have probably built a project and had to troubleshoot it on your bench, we are in a troubleshooting situation here with the additional challenge of being 600 km away from our bench.

73
Jerry Buxton, N0JY
AMSAT Vice President of Engineering

[ANS thanks Jerry Buxton, N0JY, AMSAT Vice President of Engineering for the above information]

Fox-1Cliff Designated AMSAT-OSCAR 95 (AO-95)

by

On December 3rd, 2018, Fox-1Cliff was launched on a Falcon 9 vehicle from Vandenberg Air Force Base in California. Part of Spaceflight’s SSO-A: SmallSat Express launch, Fox-1Cliff was named after long time AMSAT supporter Cliff Buttschardt, K7RR (SK). In the 48 hours after launch, more than 110 amateur radio operators around the world have successfully received and submitted telemetry from the satellite.

Following in our long tradition of naming amateur satellites, AMSAT hereby designates Fox-1Cliff as AMSAT-OSCAR 95 (AO-95).

Thank you to those who have supported this mission with their time, talent, and financial support for the benefit of amateur radio operators worldwide.

73,
Drew Glasbrenner, KO4MA
AMSAT VP Operations / OSCAR Number Administrator

[ANS thanks Drew Glasbrenner, KO4MA, AMSAT VP Operations /  OSCAR Number Administrator for the above information]