[eagle] Re: [Fwd: Maxwell 3D Training, Burlington MA, January 17-18]

[Steve Schwarm]

I tried to sign up but the class was full so I'm on the waiting list.

Steve, W3EVE

Tom Clark, K3IO wrote:
> Another ANSOFT class in Boston:
> 
> -------- Original Message --------
> Subject: 	Maxwell 3D Training, Burlington MA, January 17-18
> Date: 	Wed, 19 Dec 2007 12:48:20 -0500
> From: 	Ansoft News <no-reply at ansoft.com>
> To: 	K3IO at verizon.net
> CC: 	ANS14
> 
> 
> 
> Maxwell 3D Training 
> <http://www.ansoft.com/training/Bos.cfm?id=1631&src=maxtrain05>
> Maxwell 3D Training • January 17–18
> 
> Ansoft <http://www.ansoft.com/index.cfm?src=maxtrain05>Please join us 
> for the next Maxwell® 3D 
> <http://www.ansoft.com/products/em/max3d/index.cfm?src=maxtrain05> 
> training class on January 17–18 at our regional office in Burlington, MA.
> 
> This two-day course uses examples and exercises to provide a 
> comprehensive understanding of Maxwell 3D using the Magnetostatic, 
> Electrostatic, Eddy Current and Transient solvers.
> 
> A combination of hands-on examples and instructor lectures will cover 
> the following topics:
> 
>     *
>       Basic modeling
>     *
>       Material assignment
>     *
>       Boundary and source definitions
>     *
>       Torque/force computations
>     *
>       Inductance/capacitance calculations
>     *
>       Solution setup
>     *
>       Introduction to parametric simulation using Optimetrics
>       <http://www.ansoft.com/products/tools/optimetrics/index.cfm?src=maxtrain05>™
>     *
>       Field visualization and post-processing
> 
> *Register:*
> www.ansoft.com/training 
> <http://www.ansoft.com/training/Bos.cfm?id=1631&src=maxtrain05>
> 
> 	
> Register <http://www.ansoft.com/training/Bos.cfm?id=1631&src=maxtrain05>
> 
> Next Class
> 
> Date: 01/17–18
> Time: 9a-5p
> Agenda: PDF <http://www.ansoft.com/training/max3d_boston.pdf>
> 
> 
> Instructor:
> Dennis Steward
> Dennis Steward
> 
> Ansoft Corporation <http://www.ansoft.com/index.cfm?src=maxtrain05> • 
> 225 W. Station Square Drive • Pittsburgh, PA 15219 • 412-261-3200
> 
> If you no longer wish to receive commercial emails from Ansoft, please 
> go to our Email Removal Request page at 
> www.ansoft.com/membership/removal_request.cfm 
> <http://www.ansoft.com/membership/removal_request.cfm?src=maxtrain05>, 
> enter your email address, and we’ll remove it from our 
> email-distribution list. If you have additional addresses, please enter 
> them as well. These include addresses you use to register for Ansoft 
> events or to download Ansoft SV products, white papers, etc. To review 
> Ansoft’s Privacy Statement, please visit www.ansoft.com/privacy.cfm 
> <http://www.ansoft.com/privacy.cfm?src=maxtrain05>.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Via the Eagle mailing list courtesy of AMSAT-NA
> Eagle at amsat.org
> http://amsat.org/mailman/listinfo/eagle