[eagle] Re: 70cm Receiver Temperature Run in External Reference Mode.

[Jim Sanford]

Bill:
Please share with ALL of us the info on the one you've settled on.  I 
for one, will use it in the design of my terrestrial microwave system . . .

Thanks & 73,
Jim
wb4gcs at amsat.org


Bill Ress wrote:

>Hi Juan,
>
>Again - splendid data. Your testing has uncovered an important issue 
>with the digital10 MHz oscillator. John, in a prior post has agreed to 
>switch to an analog oscillator for rev B, so the issue is behind us, 
>again thanks to your efforts. That also gets rid of the only BGA device 
>on the board and that did cause you some gas pain early on in the 
>assembly phase.
>
>I'm sure John has leads on a analog suitable oscillator but I'll 
>communicate with him with the info on the one I settled on.
>
>Happy 4th to all...Bill - N6GHz
>
>Juan Rivera wrote:
>  
>
>>All,
>>
>> 
>>
>>I ran a Temperature Run on the 70cm Receiver in External Reference 
>>Mode.  Click HERE 
>><http://www.juanr.com/pages/hobbies/ham_radio/Eagle/Temperature_Run.htm> 
>>for details...
>>
>> 
>>
>>73,
>>
>>Juan
>>
>>    
>>
>
>_______________________________________________
>Via the Eagle mailing list courtesy of AMSAT-NA
>Eagle at amsat.org
>http://amsat.org/mailman/listinfo/eagle
>
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://amsat.org/mailman/private/eagle/attachments/20070704/deff4252/attachment.html