[eagle] Re: New 70 cm Receiver Test Results
John B. Stephensen
kd6ozh at comcast.net
Sat Jun 9 18:14:35 PDT 2007
The 68 kHz spacing indicates that the source isn't the PLL as it's phase detector operates at 125 kHz. The switching regulator on the CAN-Do module should be the only device that changes frequency with input voltage.
73,
John
KD6OZH
----- Original Message -----
From: Juan Rivera
To: 'Robert McGwier' ; 'John B. Stephensen'
Cc: eagle at amsat.org ; 'David Smith' ; 'Dave Black (Work)' ; 'Dave Black (Home)' ; 'Samsonoff at Mac. Com' ; 'Juan.Rivera (Work)'
Sent: Saturday, June 09, 2007 20:25 UTC
Subject: RE: [eagle] Re: New 70 cm Receiver Test Results
Folks,
I've bypassed U17, the 10 volt step-down converter, in an effort to isolate the cause of the spurs in the IF output. I've also started a new log. You can jump there by clicking here, or go to the AMSAT 70 cm receiver page and click on Spur Troubleshooting under Project Status.
73,
Juan
WA6HTP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://amsat.org/mailman/private/eagle/attachments/20070609/440cf884/attachment.html
More information about the Eagle
mailing list