[amsat-bb] Potential 23cm FM transmitter
brad.wf7t at gmail.com
Wed Jan 31 05:14:56 UTC 2018
Mac, the arrival I was referencing started on page 20 of the Jan 2018 issue—a number of pages back from the region you quoted from.
The links at the end of the article point to the following site of Bas PE1JPD, who has a nice single board FM unit that has potential. Looks like he offers his kits for about 158 Euros+shipping: http://www.pe1jpd.nl/index.php/23cm_nbfm/
73 Brad WF7T
On Jan 30, 2018, 7:47 PM -0600, Mac A. Cody <maccody at att.net>, wrote:
> This is my third attempt to post this message. It seems that the AMSAT-BB
> blocks messages with JPEG attachments. Below is a Google translation of
> the article on the 23cm transceiver inDKARS magazine.
> Mac Cody / AE5PH
> VHF-UHF-SHF News
> This month provided by Hans van Alphen, PAØEHG
> Nice new transistor for 23 cm PA
> Since the beginning of this year NXP has a nice power LDMOS transistor
> in the range for the 23 cm band.
> The transistor type: MRFE8VP13350 assumes pre-matched adaptation and is
> designed for industrial, scientific and medical applications. The
> transistor is capable of supplying 350 watts in the frequency range 700
> to 1300 MHz, which is also ideal for our 23 cm band.
> With a typical LDMOS supply voltage of 50 volts, approximately 10 to 14
> amps is required to get the 350 watt output with a control of 8 watts, a
> comfortable 16 dB gain.
> Italian Technology Broadcast offers 490 Euro ex VAT a module for sale
> consisting of a built pallet with all parts on it and a copper base of
> 9.5 mm thick that needs to be mounted on a cooling plate.
> Further information and how to order this unit can be found via:
> For those for whom this power is not yet sufficient, NXP has also
> announced a bigger brother, the MRF13750H, which can deliver an output
> of no less than 750 Watts in the band from 700 MHz up to and including
> 1300 MHz. With almost 20 dB gain, approximately 10 Watts is sufficient
> to send the transistor. This transistor will probably soon be on the
> market and possibly also as a complete one
> power pallets become available. Data from this transistor can be found at:
> 70 cm EME with only 10 watts
> On 2 December 2017, the M6EBQ succeeded in making a 70cm EME QSO with
> DL7APV with only 10 Watt output. The connection in WSJT was made with 10
> W output from a Yeasu FT857 and as antenna a DG7YBN 70-17m 17 element Yagi.
> The antenna used to design by DG7YBN uses a flat folded dipole with
> which very favorable characteristics can be achieved.
> The antenna has the property that the side lobes at the back are very
> well suppressed and thus a very good front-rear ratio for the length of
> this antenna.
> With 3.63 meters in length and a gain of 17.3 dBi and a front-back ratio
> of no less than 38 dB, this is also a very suitable antenna for
> contests. Of course, therefore, there is also little noise picked up and
> the antenna is also very suitable for moonbounce.
> Information on how to make this antenna can be found at:
> On 01/26/2018 01:43 PM, Brad Brooks wrote:
> > For those who receive the DKARS magazine, there is a very interesting article. The transceiver described is for ATV, but it looks like like it will tune to the AO-92 uplink frequency. Seems to put out 400mw FM out. I am not able to take time now to review deeper (stealing away from work) but I look forward to parsing through the schematic/links this weekend. I am forwarding this notice for anyone who will be able to get there sooner. I think there is some potential here, and I would like to know other’ opinions.
> > Www.dkars.nl
> > 73 Brad WF7T
> > Nashville TN EM66
> > _______________________________________________
> > Sent viaAMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership. Opinions expressed
> > are solely those of the author, and do not reflect the official views of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite program!
> > Subscription settings:http://www.amsat.org/mailman/listinfo/amsat-bb
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB