[amsat-bb] Fox Tlm with FC dongle
vu3tyg at yahoo.co.in
Thu Jan 11 05:26:53 UTC 2018
Just of confirm need to enter the center freq in the FCHID2 ? 73
From: Mark L. Hammond <marklhammond at gmail.com>
To: David G0MRF <g0mrf at aol.com>; amsat-bb at amsat.org
Sent: Thursday, 11 January 2018 7:21 AM
Subject: Re: [amsat-bb] Fox Tlm with FC dongle
From time to time with the FCDPP I find this helpful to do if something is going "wrong":
unplug/plug in FCDPP
followed by launching FCHID2.002.exe then resetting to default values, then setting the frequency to the "center" frequency I want to use with FoxTLM
followed by launching FoxTLM
That fixes about anything "weird" I've seen! Give that a go.
At 06:53 PM 1/10/2018 -0500, David G0MRF via AMSAT-BB wrote:
>I've returned from a break over Christmas and noticed the signal level on my fox-tlm screen has dropped.
>I've also noticed that the various parameters for the dongle include LNA and Mixer gain along with IF bandwidth of 200kHz
>However, there is also a box that says RF filter and that is set to 0-4MHz.
>I can't see anyway to change the RF filter setting ! I assume this should be 2m to select the internal SAW filter.
>Any idea where I can start looking?
>Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership. Opinions expressed
>are solely those of the author, and do not reflect the official views of AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB