Franklyn A. Ballentine, Jr
art.ballentine at gmail.com
Tue Feb 20 04:36:09 UTC 2018
I keep starting and stopping.
I printed all the parts but it was for V2 so I have to print V3.
I ordered boards but it's been so long I don't know if they've been revised
Are the V3 printed parts available for purchase anywhere? My club 3D
printer is a bit of a hike for me.
On Mon, Feb 19, 2018 at 10:38 PM Don KB2YSI <kb2ysi at gmail.com> wrote:
> Great information here!
> Using angle stock certainly would be cheaper, but not everyone has the
> equipment to cut to length, drill/tap holes, etc...
> I do not have those tools, nor access to a maker space that does, which is
> why I ended up getting a openbeam "starter set" to build/experiment my man
> portable IC7100 setup.
> I like what I see in the openbuildspartstore!
> On Sun, Feb 18, 2018 at 5:48 PM, Roy Dean <royldean at gmail.com> wrote:
> > FYI to anybody who is unaware, wood cutting brazed carbide circular saw
> > blades (mounted in el-cheapo miter saws, circular saws, or table saws)
> > cut aluminum wonderfully. Wear a face shield, as hot chips fly
> > everywhere.
> > > The places like 8020, Misumi, and some Open Builds resealers
> > > will cut the material to size for a small fee per cut. I do not have
> > > a cutoff saw and my hack saw skills would not make the nice square
> > > cuts. Mike Hoblinski
> > > N6IMF
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> 73, Don KB2YSI
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> are solely those of the author, and do not reflect the official views of
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB