[amsat-bb] Problem getting into RS0ISS digipeater
scott23192 at gmail.com
Mon Oct 30 02:15:55 UTC 2017
I was able to get digipeated on the 1828 UTC pass today, but at times over
the past week or so, it's not seemed to be as strong on RX or TX.
Of course the digipeater was off when they had the space walk the other
I've turned the speaker volume up on some passes recently listening for any
sign of QIKCOM-1... it's totally subjective but the signal from the ISS
hasn't sounded as strong as I've heard in the past. I have also noticed
that I can forget about a digipeat after it has passed my location.
Perhaps the antenna location on the ISS is blocked from certain angles?
On Sun, Oct 29, 2017 at 12:28 PM, Alex Weimer via AMSAT-BB <
amsat-bb at amsat.org> wrote:
> I am using AGW Packet engine and UISS to work both NO84 and RS0ISS
> however recently I have been having problems getting into the digipeater on
> the ISS. 25 watts of power and a 7 element M2 yagi. Is there a change in
> the packet modem on ISS or have they made some modifications that make it
> more difficult to access the satellite ?? Thank you JACK KC7MG
More information about the AMSAT-BB