[amsat-bb] FTM-100DR APRS path for ISS?
bruninga at usna.edu
Thu Jun 1 16:14:02 UTC 2017
Apparently, the current version of the FTM-100DR cannot set an APRS path for
digipeating via the ISS.
See page 41 of the FTM-100DR APRS manual. Your choices for digipeater route
are "OFF", "WIDE1-1", or "WIDE1-1,WIDE2-1". Other than those three
selections, the route is not configurable.
This leaves out via ARISS, or the universal via APRSAT which should be
supported by all APRS satelliites.
More information about the AMSAT-BB