[amsat-bb] (no subject)
ko6th.greg at gmail.com
Sun Feb 19 19:39:13 UTC 2017
What rig are you using in the shack? Many of them have the option to
power a pre-amp via the coax, though sometimes this requires opening the
box up to move a jumper.
Dale Kubichek via AMSAT-BB wrote:
> These are very good devices (lil pricey), but an issue I found is they do not sell the shack-coax-end 'voltage input/isolation' box/device to power these via coax.
> Just like I'd like to find a solid low-loss on-mast two-position-coax-switch to be controlled via ~12VDC from the shack coax. Making changing CP or Vet/Horz easy with only one coax feed. I want them for 2m/70cm/1.2G. MFJ has one but it's not rated for >150MHz.
> Best regards,
> Dale Kubichek, MS-EET, N6JSX
> Sidney, OH 45365 EN70vh
> Message: 2
> Date: Sat, 18 Feb 2017 20:34:38 -0500
> From: Paul Stoetzer <n8hm at arrl.net>
> To: "kb2cwn at yahoo.com" <kb2cwn at yahoo.com>
> Cc: "amsat-bb at amsat.org" <amsat-bb at amsat.org>
> Advanced Receiver Research has the most cost effective mast-mounted RF
> switched preamps.
> SSB Electronics' line of preamps might be better, but are more expensive.
> Paul, N8HM
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions expressed
> are solely those of the author, and do not reflect the official views of AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB