[amsat-bb] Yaesu G-5500 az issue
kb2m at arrl.net
Fri Aug 4 18:53:29 UTC 2017
I removed the rotor from the tower today and started working on the azimuth
rotor. When power is applied via left or right control the motor is running.
I carefully split the case and everything appears intact. Grease is still
good, no missing gear teeth, no metal shavings in bottom of housing. So the
problem is somewhere in the gearing, or mechanical control. I would like to
proceed further but have no exploded view of the inside of the rotor. I
wouldn't want to proceed without some kind of service manual part
description view. Does anyone have anything that might help? Does anyone
have a clue, maybe had this same problem and fixed it?I already have the
useless Yaesu user manual..
73 Jeff kb2m
More information about the AMSAT-BB