[amsat-bb] Funcube Dongle Pro+ settings with FoxTelem 1.02b
Mark L. Hammond
marklhammond at gmail.com
Thu Nov 19 21:05:22 UTC 2015
I am going to copy AMSAT-BB because this will help some others I hope!
Here is what works well for me and the FuncubeDongle Pro + and FoxTelem
1-On main screen, "Check" Track Doppler and Find Signal; I use default
values in the boxes (15.0dB, 6.0dB)
2-Under the Spacecraft Menu, go to both Fox-1Cliff and Fox-1D parameter
screens and "Uncheck" Track when Find Signal Enabled
3-Under the Spacecraft Menu, go to Fox-1A and "Check" Track when Find
Signal Enabled; I use Downlink=145979, Lower Freq. Bound=145973, Upper
THAT should get your good, fast lock on the Fox-1A signal. Works well
here setup like that.
Let me know how you make out!
On Thu, Nov 19, 2015 at 8:02 AM, Bob KD7YZ <kd7yz at denstarfarm.us> wrote:
> Hi Mark.
> Early on with Fox1A "somebody" emailed me about trimming down the
> FOX1A_fm.dat a bit and limiting the scan range for FoxTelem to find the
> beacon early on in an orbit.
> I just beeefwittedly overwrote some data files when updating the
> FoxTelem program. Thus I now have numerous "Tabs" of Fox1-1C and H and
> so forth.
> Were you the one who suggested the trim-down ?
> Otherwise, any ideas on shaping that Dat file to make it find the signal
> earlier and stay locked on?
> Mine "was" working just fine with whatever I'd put in the folder. Or
> maybe the stock program as it is now written is just fine.
> Bob KD7YZ
> AmSat LM#901
Mark L. Hammond [N8MH]
More information about the AMSAT-BB