[amsat-bb] Digi QSO via ISS?
wageners at gmail.com
Mon May 11 19:57:12 UTC 2015
I would disagree with that statement. While I don't have time every week to
do that, whenever I use the ISS APRS, I have been able to connect with one
or two stations (pending time and orbit) using UISS to have a quick
exchange. It is all within the operator and willingness to respond. The key
is to respond to a specific station in the beginning using their callsign
as listed by UISS.
Just checked on ARISS.net and folks have been chatting on the last pass
73, Stefan, VE4NSA
On Mon, May 11, 2015 at 3:33 PM, Vince Fiscus, KB7ADL <vlfiscus at mcn.net>
> At 03:16 PM 5/11/2015 -0400, Steve Kristoff <skristof at etczone.com> wrote:
>> I apologize if this has been dealt with in a previous thread, but if it
>> was, I missed it.
>> Can we do a valid QSO by ISS digipeater?
> Yes, If you can get through the APRS QRM.
> You have to unproto via the ISS digi callsign. Back in the Mir
> days packet contacts were easy, but APRS has rendered keyboarding
> through the ISS digi pretty much impossible.
> Sent via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> are solely those of the author, and do not reflect the official views of
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB