[amsat-bb] CAT control for TX and RX
Stephen E. Belter
seb at wintek.com
Sat Jun 21 19:08:40 UTC 2014
Tom's article was very helpful. It can be found at:
73, Steve N9IP
Steve Belter, seb at wintek.com
On Jun 21, 2014, at 2:54 PM, "Hector, CO6CBF" <co6cbf at frcuba.co.cu> wrote:
> Hello guys!
> I have been running full computer control with a FCD Pro+, HDSDR, SATPC32
> V12c and a FT-817nd.
> SATPC32 controls HDSDR and the FT-817, It runs Doppler correction on both.
> When I click the HDSDR `s waterfall, SATPC32 sets the proper frequency in
> the FT-817nd. It works great!
> The FCD Pro+ has a great rejection on the 70cm band. You can run
> full-duplex, even running 50W on 2m. It is a wonderful receiver!
> Thomas Doyle, W9KE wrote a great article explaining how you can get the
> FUNcube Dongle working with SatPC32 to operate full duplex on linear
> satellites using the FCD and a conventional radio.
> I am sorry, I don't have the link for that. You might do a Google search on
> FUNcube <==> SatPC32.
> Hector, CO6CBF / KF5YXV
> -----Mensaje original-----
> De: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] En nombre
> de Stephen E. Belter
> Enviado el: Saturday, June 21, 2014 09:15
> Para: Stu2
> CC: amsat-bb at amsat.org
> Asunto: Re: [amsat-bb] CAT control for TX and RX
> Yes. For example, SatPC32 will control two radios and run Doppler
> correction on both. The receiver can be HDSDR.
> In my case, I'm using SatPC32 to control HDSDR with a FUNcube Dongle Pro+
> and an Icom IC-821.
> 73, Steve N9IP
> Steve Belter, seb at wintek.com
> On Jun 21, 2014, at 7:32 AM, Stu2 <stu at stu2.net> wrote:
>> I'm preparing for Field day and would like to use a combination of
>> (RX) and a Kenwood TS-2K (TX) radio. The RTL-SDR dongle and preamp
>> make a great RX. Ham Radio Deluxe only connects to a single radio.
>> Is there a way to control both radios at once to correct for Doppler?
>> The problem would be similar to controlling two FT-817s, except both
>> radios would be different in my case.
>> Thanks and 73's
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB