[amsat-bb] Receiving TigriSat Satellite
vu3tyg at yahoo.co.in
Fri Jul 18 15:41:53 UTC 2014
I suggest setup the TS 2000 TNC in AGWPE and OnlineKISS will connect to the port in AGWPE to enable decode. Other way is to use a software TNC http://uz7.ho.ua/packetradio.htm to which Online KISS will connect to decode the data.
> From: Rupesh Lad <rupeshdlad2738.rl at gmail.com>
>To: amsat-bb at amsat.org
>Sent: Friday, 18 July 2014 8:59 PM
>Subject: [amsat-bb] Receiving TigriSat Satellite
>I am trying to receive TigriSat, First Iraqi satellite which have a FSK
>Beacon on 435MHz frequency. I use a 2 unit array of cross Yagi antenna and
>Kenwood TS2000 TRX.
>The packet sounds quite good on TS2k whereas nothing is decoded on
>OnlineKISS+ ver 8.2.2 by DK3WN. The COMM port is connected to the serial
>port of TRX. The internal TNC of TS2000 was set to KISS mode. On air baud
>rate 9k6 and COMM port baud rate to 9k6 as expected. The COMM port also
>goes green on the software screen.
>Have I miss any setting or is anything else required to decode the signals?
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB