[amsat-bb] Re: KySat Dashboard

Mark L. Hammond marklhammond at gmail.com
Fri Nov 22 19:00:18 PST 2013

Hi Pete,

You need to put the TNC into KISS mode before running their software.   At least that is the case here with a Paccomm TNC.    Make the com port settings match your system (port number, baud).

No need for any port emulators.

It works OK here.


Mark N8MH 

At 07:13 PM 11/22/2013 -0500, Peter Portanova wrote:
>Hello, It’s been some time that I linked my TNC to a dashboard output, and I honestly forgot the setup.  I know that the TNC needs to be in KISS mode and there might be a serial port emulator in the setup.  If anyone can give me some guidance on the required steps to allow the TNC to talk to the KYSat dashboard I would be very grateful, thank you. 73 Peter WB2OQQ _______________________________________________ Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 

More information about the AMSAT-BB mailing list