[amsat-bb] Re: ISS and the TS 2000
kc0bmf at gmail.com
Mon Nov 11 19:46:15 PST 2013
SATPC32ISS should fix you up. Look at SATPC32 in your programs folder, it
should be there.
I'm not sure about the TS 2000, I use Icom 910 but that shouldn't matter.
With SATPC32ISS it
should set your radio int split mode with the 2 frequencies that you need
for voice. However if
you are trying for the 145.825 simplex if you have it input in the Doppler
Sqf in Auxiliary Files
under the question mark on the tool bar of Satpc32 it should show up in the
CAT, then click
on the frequency. Clear as mud isn't it ? I may not of described it very
well but if you look in
these areas it may help you out. If you need more help just ask
73 John KC0BMF
On Mon, Nov 11, 2013 at 9:22 PM, Jeff Moore <tnetcenter at gmail.com> wrote:
> ISS voice contacts are NOT simplex. They are just not cross-band. You
> have a different uplink and downlink frequency but within the same band
> similar to a conventional repeater.
> You should be able to set both the software and the radio to the correct
> 7 3
> Jeff Moore -- KE7ACY
> On Mon, Nov 11, 2013 at 6:29 PM, Rich/wa4bue <richard.siff at verizon.net
> > Hi all,
> > The K4AMG CLUB is using the TS 2000 and SATPC32.
> > In SAT mode the program or the transceiver gives an uplink and down link
> > frequency. The ISS is simplex. Is it possible to work a simplex mode to
> > the ISS with this configuration?
> > God Bless
> > R
> > W4BUE
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB