[amsat-bb] Re: full duplex w/ 2 HT's
ron.nutter at networkref.com
Sun Jun 3 14:17:07 PDT 2012
I have used a duplexer on the UHF side of my satellite ops for several
years. I find that some radios have more of a desense problem than
others. Here is a link to my website where I briefly talk about what I
do on portable ops and using what is referred to as a Mode J filter -
AMSAT Area Coordinator for Missouri
On 6/2/12 11:33 AM, Robert Coppock wrote:
> hola, i am trying to determine the best way to work full duplex on the birds with 2 HT's or radios. i cannot find any info so far on the web. my concern is to keep the transmit power out of the receive radio, i guess basically the difference between a diplexer and duplexer. since i am efficient (lazy) i thought i would just look for suggestions here while i am checking google also. what do i need, di/du/ plexer, and what is the correct wiring scheme ? i will be using the arrow antenna without the built in duplexer, from the 2 feeds (vhf/uhf) and 2 HT's for now. my picture of it so far, is to wire the vhf radio direct to the vhf feed port on the arrow, and have the uhf port on the arrow come into a duplexer, with the duplexer uhf port going to the uhf radio, and the duplexer vhf port terminated into a 50 ohm dummy load. also, any suggestions of specific duplexers would be appreciated. i think i started on this project a few years ago, but never got around to getti!
> ng it all together. grazie mille, Robert k f 0 g cn81 in the woodwork, literally, shasta/klamath national forests.
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB