[amsat-bb] Re: satpc32 problems
erich.eichmann at t-online.de
Fri Jan 6 00:43:14 PST 2012
I'm sorry that you have problems with the program.
I suppose you are running the latest version 12.8b. Also, I suppose the
program worked when you first started it after installation and the problems
occured after you configured it.
The best will be:
Uninstall the program and re-install it. It should now start with the
settings that come with the setup file. Then configure the program
COM port error:
The COM port for CAT control can be chosen in menu "Radio Setup". Make sure
that the port is available on your system and not in use by another program.
With the Windows System panel check which COM ports are available on your
system. If you use a USB-to-Serial adapter the COM port number will change
if you change the USB port! That would explain that COM 3 is no longer
No source file found error.
I have described that error in the FAQs file (sect. 5 h). I have just
updated that section in the FAQs file on my website. You can open that file
with the link on my website www.dk1tb.de, English page "Downloads". Please,
read the item 5h carefully.
When you have a flawlessly working configuration start the program
"DataBackup" from the SatPC32 menu "Programs" and save your settings. So,
you can easily restore the working configurations if problems occur lateron.
73s, Erich, DK1TB
----- Original Message -----
From: "Bob- W7LRD" <w7lrd at comcast.net>
To: <amsat-bb at amsat.org>
Sent: Friday, January 06, 2012 7:03 AM
Subject: [amsat-bb] satpc32 problems
> I had to reinstall satpc32. first problem
> ..could not open com port 3
> then no source file found for group standard
> still getting the error 105 marching across the screen
> thanks from the digitally challanged
> 73 Bob W7LRD
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB