[amsat-bb] Re: 70 MPH S-band dish
nss at mwt.net
Sat Oct 29 12:45:51 PDT 2011
What frequency is this for?
The Original Rolling Ball Clock
On 10/29/2011 1:43 PM, Bob Bruninga wrote:
>> Bob, You might want to consider a Helical antenna
>> for your mobile station. It would have less wind
>> drag and easier to rotate.
> Actually, I'm beginning to think we will build our own dish. I have a 5' solid metal dish. I think we will just use it as a form and lay in some copper strips evry 4 inches or so in one dimension, then overlay say, #12 copper wire every 1" in the other direction, and then solder each crossover point.
> The result will be a linear polarized 4' dish with very low aerodynamic crossection. A little structure behind it and is it should handle 70 MPH easily.
> I think 1/4" wide copper strap is used for winding some big motors, and should be easy to find. Using the flat strap for the supports gives a nice soldering cross point.
> We need the 4' dish to close the link when the balloon is 20 miles up. I dont think we can get that with a helix. My guess is the dish will give us about 24 dBi vertically polarized with a beamwidth of about 10 degrees?
> Bob, WB4APR
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB