[amsat-bb] Re: probably simple
ko6th_greg at hotmail.com
Thu Jan 7 19:34:12 PST 2010
SatPC32 is probably an excellent program (I'm on Linux here, so can't use it), and if you've got the automation available, that's certainly the best way to go. And, by definition, the lower the elevation, the farther away the satellite is, so your DX contacts are going to be at the edges of the pass.
But any pass where you are really stretching the footprint is going to be a low elevation pass. The more you stretch, the lower the pass. In the limit, I think Bob's ultimate pass has a peak at .001-degrees for both stations. If you're doing that, then you're at TCA, and zero doppler.
That's all I meant to convey,
> Date: Thu, 7 Jan 2010 05:53:13 -0500
> From: glasbrenner at mindspring.com
> To: ko6th_greg at hotmail.com
> CC: w7lrd at comcast.net; amsat-bb at amsat.org
> Subject: Re: [amsat-bb] Re: probably simple
> Greg D. wrote:
> > Hi Bob,
> > Whatever the satellite, if you're trying to stretch the footprint, your sked is always going to be at the peak of elevation, for that fleeting moment when the satellite is a few degrees above the horizon. That means that you're always going to be at zero doppler shift, and the math will always be the same. Find yourself once at TCA on any pass, and lock them in. The numbers will be the same for your sked.
> > Good luck,
> > Greg KO6TH
> I wouldn't agree with that statement at all. Most of my long haul
> contacts on AO-7, FO-20 and 29, and now HO-68, are right after AOS or
> just before LOS, certainly not at TCA. Use my recent QSOs on HO-68 with
> Argentina as an example. Even when I work Europe on AO-7 it is at the
> beginning or end of a pass...not the middle.
> Bob, SatPC32 will show you the frequency with Doppler shift, and the
> Doppler shift. A little subtraction or addition and you have what you want.
> 73, Drew KO4MA
Hotmail: Trusted email with powerful SPAM protection.
More information about the AMSAT-BB