[amsat-bb] Re: M-Squared Eggbeater woes
bhowell at mail.utexas.edu
Fri Dec 17 17:49:12 PST 2010
The loops are secured with Allen screws at their bottom. They take a
3/32 Allen wrench to tighten them (I just checked
this on my Eggbeater).
You might want to make sure there's no ice in the hex hole, or the
wrench won't get a good bite.
Let me know if you need a copy of the manual and I'll email it.
On Dec 17, 2010, at 2:16 PM, George Henry wrote:
>> From the ground, I can see that the fiberglass support rod for the
>> loops on my
> 2-meter M2 Eggbeater has separated from the center housing, and the
> loops are
> now bobbing around in the wind.
> Before I even *think* about climbing up there to fix it or put
> something else in
> its place in the middle of a Chicago winter, can anyone provide any
> details on
> how the rod attaches to the housing? (photographs would be even
> better) It's
> been up there a while, and my memory of the construction has faded....
> George, KA3HSW
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the
> Not an AMSAT-NA member? Join now to support the amateur satellite
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB