[amsat-bb] Re: KPC-9612+ with TS-2000
Mark L. Hammond
marklhammond at gmail.com
Mon Apr 26 10:38:32 PDT 2010
While I can't comment on the specific TNC hookup---please remember to
carefully check the MENU settings on the TS-2000. Pay special
attention to settings about baud (9600), etc.
There may be others, but look over the menus carefully. There are
LOTS of things you can set in the radio--it's very handy!
On Sun, Apr 25, 2010 at 2:56 PM, Nathaniel S. Parsons <nsp25 at cornell.edu> wrote:
> I should add that I'm using the following pin number connection:
> KPC: As you look at the connector on the rear panel, it goes
> 5 4 3 2 1
> 9 8 7 6
> TS-2000: As you look at the connector on the rear panel, it goes:
> 9 10 11 12
> 5 6 7 8
> 1 2 3 4
> On Sun, Apr 25, 2010 at 2:51 PM, Nathaniel S. Parsons <nsp25 at cornell.edu> wrote:
>> Hi everyone,
>> Thanks for the help with our 4800 bps issue. We haven't found a
>> solution yet, but we're working on it, and I'll let you know when we
>> have something figured out.
>> Just now, I found a Kantronics KPC-9612+ lying around the lab, and
>> would like to fire it up with our TS-2000 to see if it's still in
>> working order. Can someone check to see if I've figured out the pinout
>> correctly? I'll put the KPC pins on the left, and the TS-2000 pins on
>> the right.
>> 1 (Audio out) - 11 (Mic in)
>> 2 (Carrier detect) - 5,7 (Main/sub squelch)
>> 3 (PTT) - 9 (PTT)
>> 4 (CTRLB) - Not connected
>> 5 (RXA) - 1,3 (Main/sub out)
>> 6 (GND) - Any of 4,8,12 (GND)
>> 7 (Ext-In) - Not connected
>> 8 (CTRLA) - Not connected
>> 9 (GND) - Any of 4,8,12 (GND)
>> TS-2000 pins not connected: 2,6,10,13
>> Nate KC2SVI
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Mark L. Hammond [N8MH]
More information about the AMSAT-BB