[amsat-bb] Re: Yaesu G-5500 azimuth and elevation resistor pots
Gary "Joe" Mayfield
gary_mayfield at hotmail.com
Fri Oct 30 19:56:08 PDT 2009
I have actually bought time (a year or two) by re-working/re-soldering the
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of Alan VE4YZ
Sent: Friday, October 30, 2009 10:19 AM
To: 'Mark L. Hammond'; amsat-bb at amsat.org; 'i8cvs'
Subject: [amsat-bb] Re: Yaesu G-5500 azimuth and elevation resistor pots
The pots are the same as the G5400b AZ and EL - 500 ohm 360 degree.
They are also metric but if a suitable wire wound precision pot is found
there is sufficient material in the gear hub to be drilled out. The Allen
screw is also metric. 1.5mm Allen key required
See URL below for some close ups of the G5400B - similar to the 5500 except
for location of the phasing capacitor and limit switches in the AZ.
If a sealed precision wire wound pot can be found that does not have that
limiting looping wire to the center, I would be interested in a group buy to
have one or 2 spares on hand for the next rebuilt and greasing.
Domenico gave me part numbers last year but when I got a quote they were
hugely expensive but they fit my requirement of total enclosed, wire wound
>From a Sept 2008 email from Domenico:
Here are many wire wound linear potentiometers that can be adapted.
The models belove seems to be the best candidates because they are totally
encapsulated wirewound and 360° continuous rotation.
> -----Original Message-----
> From: amsat-bb-bounces at amsat.org
> [mailto:amsat-bb-bounces at amsat.org] On Behalf Of Mark L. Hammond
> Sent: October 30, 2009 9:51 AM
> To: amsat-bb at amsat.org
> Subject: [amsat-bb] Yaesu G-5500 azimuth and elevation resistor pots
> Hello All,
> We really need a FAQ section on the AMSAT web page for the
> Yaesu az/el units :)
> Anyhow, here's my question: Are the G-5500 azimuth and elevation
> resistor pots the same or different?
> Does anybody have the replacement part(s) number (s)
> handy--either from Vertex/Yaesu or another supplier?
> My azimuth pot is going bad.
> Mark L. Hammond [N8MH]
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of
> the author.
> Not an AMSAT-NA member? Join now to support the amateur
> satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB