[amsat-bb] Re: Arrow 10W Duplexer Performance Measurements
ve9qrp at gmail.com
Wed Oct 21 05:01:03 PDT 2009
I'm grateful to everyone who has contributed to this discussion.
It strikes me that the greatest improvement we could make to hand-held
yagis would be to somehow integrate a low noise preamp circuit very
close to the 70cm port. I have an indoor-style ARR preamp that I've
thought of connecting to the boom with cable ties. A powersupply using
AA batteries and a DC to DC buck-boost chip from, e.g., Maxim, would
keep the whole thing light. (Alternatively, I see that the max voltage
for my ARR is pretty high: I might get away with a pair of Nicad '9v'
Like so much of amateur radio, it's more of a challenge of
construction than anything else.
Has anyone experimented with this sort of improvement?
On Wed, Oct 21, 2009 at 8:21 AM, Allan Saul <allan at rfdesign.co.za> wrote:
> Quite a lot of guys are using the handy Arrow Model 10W
> duplexer for the handheld 146/437 antenna and mine arrived here
> today so I thought I would put it on the network analyser
> and see how it performs.....
> >From the Radio cable to the 2m antenna connector an Insertion Loss of
> 0.75dB was measured with a rejection of 57dB at 70cm. The VSWR at 2m was
> >From the Radio cable to the 70cm antenna connector an Insertion Loss of
> 1.2dB was measured with an attenuation of 56dB on the 2m signal. The VSWR
> at 70cm was 1.29:1
> The VSWR on the 2m port was 1.21:1 and on the 70cm port was 1.20:1
> For those guys wanting to look at the actual plots they can be found here
> Allan ZS1LS
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB