[amsat-bb] Re: Satpc32 with 2 TraWinsceivers
erich.eichmann at t-online.de
Fri May 15 11:53:42 PDT 2009
I just tested CAT steering of 2 Yaesu transceivers. Since I don't have a
FT-857 I made the test with my FT-847 as "Radio 1" on the uhf antenna and
the FT-817 as "Radio 2" on the vhf antenna. That worked flawlessly also with
SSB sats. With FO-29 I could tune the FT-847 as RX and the FT-817 as TX
followed, with VO-52 I could tune the FT-817, now the RX, and the FT-847,
now as TX, followed. Also the "Uplink Calibration" (menu "CAT") was no
Lateron I configured the FT-817 as "Radio 1" and the FT-847 as "Radio 2"
and that worked also flawlessly.
I will send you my setup with a separate mail off the list.
73s, Erich, DK1TB
----- Original Message -----
From: "Howard Kowall" <hkowall at shaw.ca>
To: "AMSAT-BB at amsat.org" <amsat-bb at amsat.org>
Sent: Friday, May 15, 2009 6:22 PM
Subject: [amsat-bb] Satpc32 with 2 Transceivers
> Good morning everyone
> Trying to run Satpc32 with a FT897d and FT817nd
> The ft897nd is on the uhf antenna and the ft817nd is on the vhf antenna
> it all seems to work on the FM sats but having some problems with ssb sats
> The trouble I am having is on the calibration of the freq. and doppler
> has anyone run into this
> hopefully someone has a few pointers and tricks
> Thanks to all who reply
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB