[amsat-bb] Re: Another satellite-receiver option

Howard Kowall hkowall at shaw.ca
Mon Jun 8 07:12:44 PDT 2009

Hello to All
Yes and also if you just want a small inexpensive all mode portable receiver
The Yaesu VR-500 can be bought at a reasonable price theses days
----- Original Message ----- 
From: <n3tl at bellsouth.net>
To: <AMSAT-BB at amsat.org>
Sent: Monday, June 08, 2009 8:07 AM
Subject: [amsat-bb] Another satellite-receiver option

> Hey everyone,
> Over the weekend, I had a chance to do some more testing and 
> experimenting – this time, with a Kenwood TH-F6A HT.  My sincere thanks to 
> Ed, N4ALE, who loaned me his TH-F6A for the weekend. I picked it up Friday 
> afternoon and returned it Sunday afternoon, giving it a pretty good 
> workout in the interim – well, part of it.
> I can’t tell you how it performs on AO-27, AO-51 and SO-50 because I never 
> tried it with any of our FM satellites. In fact, I never keyed the radio’s 
> transmitter. Instead, I focused on its receiver.
> The TH-F6A proved to be a capable receiver for use on AO-7, FO-29 and 
> VO-52. If you have an all-mode radio that will operate in CW and SSB on 
> the UHF and VHF bands, you can use the HT as your receiver for a 
> full-duplex station that will work our linear-transponder satellites. For 
> the record, I believe the current-production all-mode transceivers that 
> are NOT full duplex include two Icom models (IC-706MKIIG and IC-7000) and 
> three Yaesu models (FT-817ND, FT-857D and FT-897D). Anyone with one of 
> these rigs and the Kenwood can do what I did last weekend. Just add 
> antennas, or a duplexer and a dual-band antenna. There are plenty of 
> workable options, including a good number of homebrew antenna designs to 
> consider.
> I started out Friday evening just listening because I discovered I needed 
> an adapter to connect my headphones to the receiver jack on the radio, 
> which takes a 2.5 mm connector. Full-duplex contacts in SSB wouldn’t 
> happen until I had that, so I connected my Elk and configured the radio’s 
> B-Band to receive SSB in the 2 meter and 70 cm pass bands. It’s easy to 
> set up, and the fine-tuning feature permits tuning steps in CW or SSB as 
> low as 33 Hz. I chose 100 Hz, which worked well.  Switching from CW to SSB 
> took only a few seconds. Through the evening, I copied AO-7 on multiple 
> passes to the east and west of my location, and had reception below 4 
> degrees at the end of the passes, which was encouraging.
> Just before 03:00 UTC Friday evening, I had a VO-52 pass that reached a 
> maximum elevation of about 70 degrees here. I copied practically the whole 
> pass, hearing K8YSE work AA5PK and KB1PVH, and also clearly copying CW 
> from W8IJ. Here’s the fun part about that pass – I was standing in my 
> driveway, using a Diamond SRH-789 telescoping whip for an antenna. Having 
> the ability to copy pretty much the whole pass with just a whip helped me 
> to see that the TH-F6A probably would do OK as a satellite receiver.
> After picking up the headphone adapter I needed Saturday morning, I 
> started working passes. Using an SMA-to-SO239 adapter, I connected the HT 
> to the Elk using a Diamond duplexer. I used either a Yaesu FT-857D or a 
> Yaesu FT-817ND as my transmit radio. The earliest afternoon pass of AO-7 
> hit 3.8 degrees maximum elevation here, but I heard my CW signal and 
> called CQ a few times with no answer. The next pass of AO-7 was well over 
> 30 degrees here, also to my east. I worked N3TE in CW, then switched to 
> SSB and moved up the pass band for a voice contact with K3SZH. By then, 
> AO-7 was descending to my north, so I switched back to CW and started 
> calling CQ – primarily to see how long I could hear myself through the HT 
> on the downlink. I was thrilled when K4YYL called me. When we finished 
> that contact, AO-7 was at 2.6 degrees elevation according to the computer.
> I should mention here that I was manually tuning for Doppler throughout 
> the weekend, which also gave me a chance to use various software packages 
> as my “guides” for finding myself at the start of a pass.  Ham Radio 
> Deluxe’s Satellite Tracker, Orbitron and SatPC 32 all proved very helpful. 
> After launching one of the programs and getting the Doppler tuning on 
> screen, I just followed their lead and found myself quickly, then stayed 
> where I needed to be – evening tuning up and down the pass band to call 
> others I heard.
> On the next pass of AO-7 (the last of Saturday evening for me), I worked 
> K4YYL again – this time in SSB, and this time using an FT-817ND at 5 watts 
> out for my transmitter.  Think about that – a fully functional all-mode 
> satellite station that I could fit in a day pack with room to spare!
> FO-29 later Saturday evening was frustrating only inasmuch as there weren’t 
> many folks around. The first pass here hit less than 20 degrees maximum 
> elevation to my east, and I called CQ in CW without a contact.  The next 
> pass was about 70 degrees maximum elevation, and I talked to myself for 
> the first 2/3 of the pass before switching over to VO-52, which was also 
> in range at about the same time. K9QHO and I had a nice contact in SSB.
> Sunday morning, I only wanted to get some contacts on FO-29 because I 
> promised to return the radio that afternoon. I worked Dave, W8IJ, and Leo, 
> W7JPI, in SSB. Seven contacts in all, covering all three CW/SSB satellites 
> and both modes, and all of them using the Kenwood HT as my receive radio. 
> I could have made additional contacts if the satellites – especially 
> FO-29 – had been busier on the passes I worked.
> A lot of AMSAT members do demos for radio clubs and other groups from time 
> to time, and I decided to post this report on the TH-F6A with that in 
> mind. I know that many who do demos often schedule them to coincide with 
> passes of the FM LEO satellites – and there’s nothing wrong with that. But 
> AO-7 and AO-51 often make evening passes, for example, that are within 
> 30-40 minutes of each other. It occurs to me that letting folks hear 
> satellite contacts in CW and SSB over a satellite that has completed more 
> than 156.000 orbits might be pretty cool – especially when you can note 
> that anybody in the group who has an HT like this one and an all-mode 
> VHF-UHF radio can work AO-7 with the right antenna(s) and a little 
> practice.
> I looked around on the Web after returning the HT to Ed, N4ALE, and 
> learned that Alinco, AOR, Icom and Yaesu all offer HT-style receive-only 
> radios that are all mode, like the TH-F6A. I suspect any of them could 
> serve as an all-mode satellite receiver, too, although I haven’t tested 
> any of them.  I hope to have that chance moving forward. I like the TH-F6A 
> because it also can double as a full handheld station for the FM 
> satellites, albeit in half-duplex. I know that’s not the recommended way 
> to go, but I and many others are, collectively, proof that it can be done 
> effectively and without totally wrecking a pass. I hope all the 
> manufacturers soon will have at least one full-duplex-capable HT in their 
> lines – and that those radios will have all-mode receive on at least one 
> band, like this Kenwood.
> In the meantime, I encourage those of you with this little radio to 
> experiment with it as a receiver for AO-7, FO-29 and VO-52. I suspect you’ll 
> be satisfied with its performance.
> 73 to all,
> Tim – N3TL
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list