[amsat-bb] Re: G5400 Elevation Rotor Opened up
domenico.i8cvs at tin.it
Sun Dec 6 06:55:46 PST 2009
Hi John, KE5GFJ
The small nylon gear on the end of the shaft has inside a friction
disc wich is probably wear out or it is sliding because there is oil
or grease in between.
Dip the gear assembly into absolute alcohol or spry into it a dry
solvent for contac-cleaner.
I have experienced the same problem few years ago.
----- Original Message -----
From: "John" <jcrowell at centramedia.net>
To: <amsat-bb at amsat.org>
Sent: Sunday, December 06, 2009 5:04 AM
Subject: [amsat-bb] G5400 Elevation Rotor Opened up
> I opened up the G5400 elevation rotor.
> All the bearings and gears look good.
> Problem found is the motor shaft spins free inside the first, small nylon
> gear on the end of the shaft.
> Any advice on how to replace or repair that gear?
> John KE5GFJ
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB