[amsat-bb] Re: source for LMR 400 UF connectors
kl7uw at acsalaska.net
Fri Jul 4 10:28:52 PDT 2008
Lots of good reponse, Jim:
Like AL1F, I have gone to using only LMR-400 at work to replace
RG-8/RG-213 cabling. WE chose the crimp-style N-connectors at work
for speed of fabrication and have a local supplier for the connectors.
At home I still prefer the back-clamp style of N-connector. I buy
them from RF Parts (RFN-1002-iSI - male-N) at about $5.50 in
quantity. I have over twenty in my 2m-eme array working flawlessly
for ten years.
73 Ed - KL7UW
At 08:51 AM 7/4/2008, K7WIN wrote:
>I use LMR-400 and have found the best deal for connectors etc from the
>Connectors (both male and female N type) for about $2 each and the crimping
>tool for $25.
> > -----Original Message-----
> > From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
> > Behalf Of Jim Danehy
> > Sent: Friday, July 04, 2008 6:25 AM
> > To: amsat-bb at amsat.org
> > Subject: [amsat-bb] source for LMR 400 UF connectors
> > Can someone give me the contact information for a source selling
> > connectors for LMR products ?
> > Jim W9VNE
> > Cincinnati, Ohio
> > _______________________________________________
> > Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the
> > author.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB