[amsat-bb] Yaesu G-5500 Azimuth Rotator Fluctuation Problem
gschuchardt at gp.hrcoxmail.com
Sun Feb 17 13:33:55 PST 2008
I have a Yaesu G-5500 EL/AZ Rotator and the EA4TX RCI-SE interface board.
Presently, I am using Nova tracking and ARS interface software. The
elevation rotator moves very smoothly and accurately as it should tracking
designated satellites. However, the azimuth rotator fluctuates back and
forth within ~2-3 degrees. The fluctuation is very visible on the tower.
Has anyone experienced a similar problem with their rotator?
This is almost as if there is some type of interference between the rotator
controller and the interface. Is there anything within the controller that
might cause this problem?
More information about the AMSAT-BB