[amsat-bb] Re: FT-847 Serial Port Communications
gschuchardt at gp.hrcoxmail.com
Sun Feb 10 18:24:28 PST 2008
I would like to than you for the information that you provided, as it
corrected the situation to where the memories downloaded so that I could
edit them and upload the new .CSV file. The CAT program works too. I also
appreciate others that offered suggestion too.
From: Alan P. Biddle
Date: 2/10/2008 6:00:22 PM
To: amsat-bb at amsat.org
Subject: [amsat-bb] Re: FT-847 Serial Port Communications
Do you have a FC-20 auto tuner attached? If so, remove the FC-20 connector,
and turn the rig off and back on. The auto tuner and CAT port use the same
circuitry and are, with some caveats, incompatible.
Some _very_ early models did not have a bi-directional CAT port, which would
certainly cause a problem with a CAT program, and possibly with a cloning
program expecting a bi-directional port.
You seem to have eliminated all the usual cable and port configuration
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB