[amsat-bb] Re: SatPC32
erich.eichmann at t-online.de
Fri Aug 22 22:17:38 PDT 2008
WinAOS shows the AOS and LOS times of multiple satellites in chronological
order for the selected period (by default 1 day). When you click on a line
all passes of THAT satellite will be highlighted. So you have better
overview for a particular satellite.
The program checks the passes in steps of 1 minute and displays the times in
full minutes. So, the maximum inaccuracy is within 1 minute (see the WinAOS
"Help" text). That is sufficient for an overview, I think.
You should use the same Keps file with WinAOS that you use with SatPC32,
73s, Erich, DK1TB
----- Original Message -----
From: "David - KG4ZLB/MØZLB" <m0zlb at btinternet.com>
To: <APBIDDLE at mailaps.org>; "Peter" <roi at optonline.net>
Cc: "'amsat'" <amsat-bb at amsat.org>
Sent: Saturday, August 23, 2008 1:50 AM
Subject: [amsat-bb] Re: SatPC32
Many thanks Alan and Pete, sorry for the late reply but SW Florida just
had an electrical and rain storm that was way worse than anything Fay
threw at us Tuesday and knocked the internet out!
I am looking at WinAOS, that is what I was looking for so thanks for that!
I am just comparing the listing given to the Countdown list on the main
screen and there are some differences and can you also tell me what the
significance is of the blue blocked entries on the list?
Alan P. Biddle wrote:
> The easiest way is to run the WinListen program, which is one of the
> auxiliary programs which is installed. Start it up, pick the source of
> and the satellite, time span and time step of interest, and then tick
> and Setting. You will note that the beginning and ending elevation
> is not exactly zero if you take the default step. Pick something smaller,
> 10 seconds or so, and it will be very close. There is an WinAOS program
> which gives related data in a slightly different format. Hopes this
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB