[amsat-bb] Re: SatPC32 and ICOM 910H question
rnutter at networkref.com
Tue Apr 15 14:12:00 PDT 2008
Will take a look at this and see what happens. Also looking at this to
manage the doppler shift with AO-16. Turning on AFC for the FM birds
takes care of it with them.
Erich Eichmann wrote:
> Hello Ron,
> In menu "Setup", "Radio Setup" check the option "Satellite mode".
> In Menu "Setup", "Options" check the Activate-at-Start option "CAT
> In both menus save the changes.
> When you restart SatPC32 it should switch the IC-910H into satellite mode.
> With FO-29 the radio should transmit on the VHF band. With VO-52 or AO-7 it
> should transmit on UHF.
> Let me know if that doesn't work.
> 55 + 73s, Erich, DK1TB
> ----- Original Message ----- From: "Ronald Nutter" <rnutter at networkref.com>
> To: <amsat-bb at amsat.org>
> Sent: Tuesday, April 15, 2008 6:52 PM
> Subject: [amsat-bb] SatPC32 and ICOM 910H question
>> I am trying to learn how to use SatPC32 for Doppler correction on the
>> SSB birds. I have run into a "brick wall" in terms of how it is
>> operating that is giving me some fits.
>> When I put SatPC32 into CAT mode, the radio shifts into the appropriate
>> frequencies but it wont transmit on the right band. When I press the
>> M/S to swap the displays around so that it will transmit on the correct
>> band, the radio stops adjusting to what is shown on the SatPC32 display.
>> Can someone point out what I am doing wrong or do I need to change to
>> one or more of the config files in SatPC32 ?
>> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB