[amsat-bb] Re: SatPC32 and ICOM 910H question

Ronald Nutter rnutter at networkref.com
Tue Apr 15 14:10:52 PDT 2008

Thanks for the things to check.  If it will go wrong, I will be the one 
to find it.


George Henry wrote:
> 1)  In the Radio setup, do you have the "Satellite Mode" box checked?  2)  You must enter the appropriate radio address in 2 columns... also, what baudrate are you using and what have you entered for the CAT delay?  (Print out the radio hints for Icom users, found under the "?" menu, and use them as a checklist.)
> I am surprised that you are having difficulty with SatPC32 and the 910H - my setup has played together beautifully from day one.
> 73, 
> George, KA3HSW
> -----Original Message-----
>> From: Ronald Nutter <rnutter at networkref.com>
>> Sent: Apr 15, 2008 11:52 AM
>> To: amsat-bb at amsat.org
>> Subject: [amsat-bb]  SatPC32 and ICOM 910H question
>> I am trying to learn how to use SatPC32 for Doppler correction on the 
>> SSB birds.  I have run into a "brick wall" in terms of how it is 
>> operating that is giving me some fits.
>> When I put SatPC32 into CAT mode, the radio shifts into the appropriate 
>> frequencies but it wont transmit on the right band.  When I press the 
>> M/S to swap the displays around so that it will transmit on the correct 
>> band, the radio stops adjusting to what is shown on the SatPC32 display.
>> Can someone point out what I am doing wrong or do I need to change to 
>> one or more of the config files in SatPC32 ?
>> Thanks,
>> Ron
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list