[amsat-bb] Re: Cape-1 & mix w help?

Jonathan Wagner jonathan at jonathanwagner.net
Wed May 2 15:18:45 PDT 2007


Those should be right, though we had problems on the ground right before 
integration as well.  The CC1020* is very sensitive to regulator noise 
as well as overvoltage, especially at the narrow G3RUH deviation.  I 
have a feeling from the data gathered, that it is seeing both conditions.

Jonathan Wagner

The CC1020* is the transceiver IC that the CAPE-1 communications system 
is based on.

john heath wrote:
> Hi guys,
> Trying to copy Cape-1 without any sucess
> Do I have the right settings in Mix-W
> I picked
> VHF 9600baud G3RUH (set sample rate 22050Hz)
> thanks in advance
> 73 John G7HIA
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list