[amsat-bb] Re: Voltage Requirements of ICOM IC-910H
Michael Hatzakis Jr MD
lists at hatzakis.net
Sun Jan 21 10:17:22 PST 2007
Excellent idea. Thanks,
But I think I am going to get on e-bay and pick up a proper supply. I agree
with the sentiment of the list.
From: amsat-bb-bounces at amsat.org [mailto:amsat-bb-bounces at amsat.org] On
Behalf Of George Henry
Sent: Sunday, January 21, 2007 9:45 AM
To: amsat bb
Subject: [amsat-bb] Re: Voltage Requirements of ICOM IC-910H
The power requirements specified in the 910H manual are 13.8 VDC +/- 15%,
which is 15.9 V on the high side. I would not feel comfortable running mine
at that level, however. I would suggest putting a couple of 100A diodes in
series with the + side of the power lead to drop it down closer to 13.8....
(2 would drop it to about 14.5, which is close to what you might encounter
in a car with the engine running)
73 de KA3HSW
----- Original Message -----
From: "Michael Hatzakis Jr MD" <lists at hatzakis.net>
To: <amsat-bb at amsat.org>
Sent: Saturday, January 20, 2007 2:25 PM
Subject: [amsat-bb] Voltage Requirements of ICOM IC-910H
>I am changing my supply for my ICOM IC-910H because my PS-30 is dying. I
> have an SGC PS-50 supply that is not regulated, per se, it is a huge
> with massive transformers. It appears to work fine, but I am worried
> the fact that is starts at 16v or so.
> Specifically, is 15.5 to 16v too high to safely run this radio and is a
> of 1-1.5 volts too much unregulation for proper operation?
> Michael K3MH
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB